Seat Leon >> Replacing the bulb for interior light W1 / W13 / W19, front

SEAT Leon Service and Repair Manual / Electrical system / Lights, bulbs, switches - interior / Lights / Replacing the bulb for interior light W1 / W13 / W19, front

Special tools and workshop equipment required

  • Lever - U30800-

Lights, bulbs, switches - interior

Removing

  • Switch off ignition and all electrical consumers.

Vehicles without access and start authorisation system

  • Remove ignition key, if fitted.

Vehicles with access and start authorisation system

  • Store the ignition key outside the vehicle to prevent the ignition from being switched on unintentionally.

Continued for all vehicles

  • Removing and installing interior light/reading light (front)
  • Turn bulb holder -arrows- of defective reading lamp by 90º to the left.
  • Take the bulb with holder out of the reading light.

  • Pull glass-base bulb out of bulb holder.

Installing

Installation takes place in reverse order.

    Remove and install luggage compartment light W3
    Special tools and workshop equipment required Lever - U30800- Removing Switch off ignition and all electrical consumers. Vehicles without access and start authorisation system Remo ...

    Replacing the bulb or rear interior light W47 / W48
    Removing Switch off ignition and all electrical consumers. Vehicles without access and start authorisation system Remove ignition key, if fitted. Vehicles with access and start authorisa ...

    See also:

    RME fuel*
    Only those vehicles fitted with special equipment (number PR 2G0 for biodiesel use) may use biodiesel corresponding to the standard DIN EN 14214. The biodiesel fuel must comply with the DIN EN 14.2 ...