Seat Leon >> Tasks to be completed on the vehicle interior
The vehicle is supplied from factory equipped with a series of protective covers fitted on the inside of the vehicle. These elements serve to protect the components and frames inside the vehicle during the transportation and the storage of the vehicle until the delivery inspection.
Tasks to be carried out
- Carry out the following work:
- Remove protective covers from the front seats.
- Remove protective covers from footwell carpet.
- Remove protective cover from steering wheel.
- Remove protective adhesive film from door profiles.
Cleaning tasks
| CAUTION Use a soft cloth moistened with water to clean the radio and / or air conditioning system from outside! (If this should not be sufficient, only use natural soap suds.) |
- Check for cleanliness, and if necessary clean:
- Front seats
- Rear seats
- Internal linings
- Floor coverings
- Glazing
Install the floor mats
- Only insert the genuine SEAT carpets.
| CAUTION To prevent any kind of risk that could compromise safety, special care must be taken when securing the floor mats inside the vehicle, and sufficient clearance must be provided for the pedals. |
Tasks to be completed on the vehicle
exterior
The vehicle is supplied from factory equipped with a series of
protective covers fitted on the outside of the vehicle, designed to
protect the vehicle during transportation and storage. Certain
par ...
See also:
Removing and installing cover for mirror
Special tools and workshop equipment required
Release lever - U30800-
Removing
Remove the wing mirror glass .
Unfasten the clips -Arrows a- and at the same time pull housing
-1- in di ...
