Seat Leon >> Connecting vehicle diagnosis and service information system
SEAT Leon Service and Repair Manual / Maintenance / Description of work / Connecting vehicle diagnosis and service
information system
Special tools and workshop equipment required
- Vehicle diagnosis tester
NOTICE It must be ensured that the selected vehicle diagnostic and service information system is only used with the associated diagnostic cable.
CAUTION
|
Work sequence
- Apply handbrake.
- Automatic gearbox: set the selector lever in the position "P" or "N".
- Manual gearbox: gear lever at neutral.
- If the ignition is switched off connect the vehicle diagnostic and service information system .
- Switch on the ignition.
Now follow instructions on screen in order to start desired functions.
Tyre pressure control system: carry out
basic adjustments
NOTICE
The basic adjustment of the tyre control indicator should only
be carried out after correcting the inflation pressure values of
the tyres.
If no pressure loss and tyre damage are found af ...
Error memory on all systems: interrogating
Special tools and workshop equipment required
Vehicle diagnosis tester
Work sequence
NOTICE
If no indications are displayed on the screen during these operations.
ODIS Service
Connecting ...
See also:
Disconnecting and reconnecting battery
CautionObserve the following instructions and
precautions on safety
when working on pyrotechnic components:
When working on pyrotechnical components (such as the
airbag, belt ...