Seat Leon >> Warning reports, Priority 1 (red)
If one of these faults occurs, the warning lamp will flash or light up and will be accompanied by three audible warnings. This is a danger warning. Stop the car and switch off the engine. Check the fault and correct it. Obtain professional assistance if necessary.
If several priority 1 faults are detected at the same time, the symbols will be displayed one after the other for about 2 seconds at a time and will continue until the fault is corrected.
No menus will be shown in the display for the duration of a priority 1 warning report.
Examples of priority 1 warning reports (red) 7)
• Brake system symbol 
with warning
text STOP BRAKE FLUID
INSTRUCTION MANUAL or STOP BRAKE FAULT INSTRUCTION MANUAL
• Coolant symbol 
with the warning
text STOP CHECK COOLANT
INSTRUCTION MANUAL
• Engine oil pressure symbol 
with
the warning text STOP ENGINE OIL
PRESSURE LOW! SERVICE MANUAL
Warning or information text in the display
Faults are shown in the display with warning lamps and
warning/information reports.
The system runs a check on certain components and functions when the ignition
is switched on and while the vehicl ...
Warning reports, Priority 2 (yellow)
If one of these faults occurs, the warning lamp lights up, and is accompanied
by one audible warning. The function should be checked as soon as possible.
If several priority 2 warning reports are ...
See also:
Removing and installing switches in
dash panel
Special tools and workshop equipment required
Lever for the front-end - 3370-
Removing
Switch off ignition and all electrical consumers.
Vehicles without access and start authorisation ...
