Seat Leon >> Lights
Switching lights on and off
Fig. 72 Detail of the dash panel: Switch for lights, fog lights and rear fog light
Switching on the side lights
– Turn the light switch fig. 72 to position
.
Switching on dipped headlights
– Turn the light switch to position .
Switching on dipped headlights
– Turn the light switch to position 0.
Switching on the fog lights*
– Pull the switch out of position
or to the first stop. The
symbol in the light switch lights
up.
Switching on the rear fog lights (vehicles with front fog lights)
– Pull the switch out of position
or to the second stop
. A warning lamp lights up in the
control panel.
Switching on the rear fog lights (vehicles with no front fog lights)
– Pull the switch out of position
to the last stop. A warning lamp
lights up in the instrument panel.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are not bright enough to illuminate the road ahead and to ensure that other road users are able to see you. Always use your dipped headlights if it is dark or if visibility is poor.
Note
• The dipped beam headlights will only work with the ignition on. The side
lights come on automatically when the ignition is turned off.
• If the lights are left on after the key has been taken out of the ignition
lock,
a buzzer sounds when the driver door is opened. This is a reminder to switch
off the lights.
• If the coming home* feature is activated, the acoustic signal for the
dipped beam headlights will not sound, it will sound if the position lights are
activated.
• The rear fog light is so bright that it can dazzle drivers behind you. You
should use the rear fog light only when visibility is very poor.
• If you are towing a trailer equipped with a rear fog light on a vehicle with
a factory-fitted towing bracket, the rear fog light on the car will
automatically
be switched off.
• The use of the lighting described here is subject to the relevant statutory
requirements.
- Automatic lighting
- Coming home / leaving home function*
- Instrument and switch lighting / Headlight range control
- Hazard warning lights
- Indicator and main beam headlight lever
Automatic lighting
Fig. 73 Automatic lighting Activation – Rotate the switch to the position “Auto”, this indication will light up. When the switch is in this position, as soon as visibility conditions ar ...See also:
Indicator, side and brake lights on the bodywork
Fig. 170 Indicator, side
and brake lights on the
bodywork
– Press on the side pin outwards and take out the lamp holder.
– Extract the failed bulb and change it for a new one.
– To refit ...