Seat Leon >> Switching the cruise control system on and off
Fig. 125 Turn signal and main beam lever: Switch and rocker switch for CCS
Switching on the system
– Push the switch fig. 125 B to the left to ON.
Switching off the system
– Either push the switch B to the right to OFF or turn the ignition
off when the vehicle is stationary.
When the speed regulation is on and a speed is programmed, the indicator
on the instrument panel is lit.18)
When the speed regulator (CCS) is turned off the indicator
is turned off, the
speed regulator is completely deactivated if the 1st gear is engaged.*
Description
The cruise control system is able to maintain the set speed in
the range from approx. 30 km/h to 180 km/h.
Once the speed setting has been saved, you may take your foot off the
accelerator.
WARNI ...
Setting speed*
Fig. 126 Turn signal and
main beam lever: switch
and rocker switch for CCS
– Press the lower part SET of the rocker switch fig. 126 A once
briefly, when you have reached the speed you wi ...
See also:
Removing and installing dipped beam
bulb M30 / M32
Note
The following illustrations show renewal of the main beam bulb
for the left headlight. The high-beam bulb in the right-hand
headlamp is replaced in the same way.
The headlight does not ...
