Seat Leon >> Wheel covers*
The wheel covers must be removed for access to the wheel bolts
Removing
– Remove the wheel cover using the wire hook.
– Hook this into one of the cut-outs of the wheel cover.
Fitting
– Fit the wheel cover onto the wheel rim by pressing it firmly. Put
pressure initially on the point of the cut out for the valve. Then
press the wheel cover onto the steel rim so that it engages all
round.
Wheel trims
The wheel trims must be removed to gain access to the wheel
bolts.
Fig. 154 Changing a
wheel: Removing the
wheel trim
Removing
– Insert the extraction hook from the tools into the designated ...
Loosening the wheel bolts
The wheel bolts must be loosened before raising the vehicle.
Fig. 155 Changing the
wheel: Loosening the
wheel bolts
Loosening
– Fit the box spanner as far as it will go over the wheel bolt.
...
See also:
Transport mode, factory mode and production
mode: deactivate using the vehicle
diagnostic and service information
system
NOTICE
This model has no "factory mode".
The transportation mode is responsible for assuring the starting
capability of vehicle.
Battery discharging is reduced by the transportation mode, beca ...
